← Back to Blog

Laundry Room Cleaning for Perth Bond Inspections — What Gets Checked

Published May 2025  |  3 min read

The laundry is a small room but it gets a thorough check at exit. It's often neglected in DIY bond cleans because it seems less significant than the kitchen or bathrooms — but property managers walk through every room with the same REIWA checklist in hand.

What Gets Checked

  • Laundry tub — scrubbed clean, taps polished, drain cleared
  • Walls — particularly around the tub where water and detergent splash
  • Flooring — swept and mopped, including behind and under the washing machine space
  • Cupboards and shelving — wiped inside and out
  • Washing machine space — lint, dust, and detergent residue behind and around where the machine sits
  • Exhaust fan cover if present — dust buildup is common
  • Window sill and track

If a Washing Machine Is Being Left

If you're leaving a washing machine in the property, it should be clean. Wipe the drum interior with a damp cloth, clean the door seal (mould often grows in the rubber), clean the detergent drawer, and clean the lint filter if accessible. Run a hot maintenance cycle if possible.

If a Dryer Is Present

Clean the lint filter and wipe the drum interior. The exterior of the dryer should be wiped down. For condenser dryers, empty and rinse the water reservoir.

Common Issues

The most commonly flagged laundry issues at Perth exit inspections:

  • Limescale and soap buildup in and around the laundry tub
  • Detergent residue on walls near the tub
  • Grime behind the washing machine — only visible when the machine is moved
  • Dirty exhaust fan cover

A thorough laundry clean takes 20–30 minutes. Don't skip it.

Get a Free Bond Cleaning Quote →

We respond within 1 hour, 7 days a week.